Link G5 Voodoo Pro

Inputs/Outputs

 

  • Control any engine with 2 cylinders, all the way up to 12 cylinders, thanks to:
    • 12 injector pins
    • 8 ignition pins
    • 4 injector/ignition dual role pins
  • Access up to 30 auxilary pins (when setup for a 4-cylinder sequential engine):
    • 8 dedicated auxiliary pins
    • 4 shared e-throttle/H-Bridge pins
    • 2 shared wideband heater pins
    • Up to 16 from spare injector and ignition drives
  • Any unused injector/ignition pins can be used as an auxiliary pin
  • All ignition and auxiliary pins are back feed protected.
  • 14 analog inputs
  • 10 digital inputs
  • 4 temperature inputs
  • Dual knock inputs
  • 2 trigger inputs
  • Dedicated ignition switch pin
  • 2 x internal wideband lambda controllers
  • Dual e-throttle, with internal solid state throttle disconnect relays
  • 5v sensor supply
  • CAN 1 input now supported via CAN connector

 

Communications

  • USB-C (cable included)
  • Connect directly to the ECU via built-in Wifi Access Point, or add it to an existing network (Antenna Included)
  • Dual CAN (CAN 1 on CAN connector, CAN 2 on header E)
  • GPS (antenna included)

 

Size & Weight

  • Length: 177.1mm (6.97 inches)
  • Width: 137.3mm (5.40 inches)
  • Min side height: 15.5mm (0.61 inches)
  • Max side height: 40.2mm (1.58 inches)
  • Weight: 795g (28 ounces)

 

Connectivity

The G5 Voodoo Pro supports the following comms standards:

  • USB-C
  • Wi-Fi
  • CAN
  • GPS

$5,744.25

0
    0
    Your Cart
    Your cart is emptyReturn to Shop